Filter
Top Products
Page 8
Mini-Brute II Owner’s Manual
OPERATING INSTRUCTIONS
NOTE: Following delivery of your Simpson
®
power washer, inspect the unit for shipping damage and
follow these directions:
1. Read all DANGER, WARNING, and CAUTION labels. Read the Owner's Manual that came with your
machine before attempting to operate the power washer.
2. Fill the fuel tank with kerosene, or #1 or #2 diesel. DO NOT USE K-1 KEROSENE.
3. Locate the unit in a convenient, well-ventilated location.
4.
5
6.
Turn on water supply.
7.
Check all hose connections for leaks.
8.
9.
10. Connect the extension wand to the gun. (Fig.2)
11.
Connect the GFCI power plug to a dedicated 120V, 60Hz, 15 Amp minimum power supply. Press the
TEST button and then press the RESET button. The red light should be illuminated.
12.
13.
Point the wand in a safe direction and squeeze the trigger on the gun allowing air to purge from the
system. Check the system for leaks.
14.
Connect 3/4” garden hose to quick connect. (Fig.2)
Attach the garden hose with quick connect to the inlet nipple on the rear of the machine. (Fig.2)
Connect the high pressure hose to machine outlet. (Fig.2)
Connect the gun to high pressure hose. (Fig.2)
Move the Pump switch to the ON position. (Fig.1)
Move the Burner switch to the ON position. (Fig.1)
CLEANING NOZZLES
PUMP SWITCH BURNER SWITCH
ON
OFF
ON
OFF
Fig. 1