Filter
Top Products
Handles and Controls Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The holes in the frame for Ref. 48 are
slotted so the gear support (Ref. 46) can
be positioned to ensure the inside surface
of the gear support is tight against the
hub of the front gear (Ref. 56).
Mount bushings (Ref. 19)
with flange on inside of
brackets, 3 places.
Slot towards
rear of unit.
Shift rod assembly (Ref. 66)
must pivot freely on
pivot blocks, (Ref. 67).
Apply adhesive to
secure grips.
Insert shift rod (Ref. 65)
into outter hole of Ref. 68.
Must pivot freely
on capscrew (Ref 32).
Apply lubricant as required.
Must slide freely in
dash assembly (Ref 18).
Apply lubricant as required.
47
1
2
8
11
18
20
21
17
26
10
27
6
11
43
3
4
39
41
42
44
58
59
61
60
60
62
68
69
67
70
66
35
58
61
67
60
72
65
64
63
45
46
19
56
50
54
55
53
49
56
48
57
19
19
9
5
52
51
7
61
71
53
23
22
24
28
25
29
29
1630
32
19
33
34
40
13
14
15
16
35
36
37
31
38
12
52
987161
The above parts group applies to the following Mfg. Nos.:
2005
10
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694867 - 9560E
1694914 - 9560EX
TP 400-4250-00-LW-S