Filter
Top Products
18
Keeping your chipper/shredder in top running condition
will prolong its life, and help you obtain optimum perfor-
mance whenever you wish to chip or shred yard or gar-
den waste.
Regular
Maintenance
Please read the normal care schedule below, and
observe these recommended care operating intervals to
extend the life of your unit.
NORMAL CARE PROCEDURES & SCHEDULE
Perform Each item at the Interval Shown
ITEM Page 5 Hrs 25 Hrs 100 Hrs*
Check For Loose Parts & Hardware 19 l
Check Oil Level And Add As Req’d 19 l Each Use
Change Oil 19 l **
Change Spark Plug 20 l
Clean Engine Fins & Air Intake Area 20 l
Clean/Oil Air Filter Element 21 l
Inspect Starter Rope & Handle 21 l
Inspect Battery & Electrical Connections 21 l
Check Battery Electrolyte Level 21 l
Lube Starter Drive Gear 22 l
Lubricate Wheel Axles 22 l
Inspect Chipper Cone & Shredder Hopper 22 l
Inspect Hopper Guards 23 l
Inspect/Rotate Shredding Hammers 23 l
Inspect/Sharpen Chipping Knives 23 l
Check Safety Labels 24 l Each Use
* Perform required care yearly or at 100 Hour intervals, whichever is less.
** Change the engine oil after the first 5 hours of operation, then after every 25 hours of operation. See engine
manual for oil recommendations or contact your dealer.
NOTE: Any unusual noise or vibration, decreased performance, or engine odor, requires immediate attention.