Filter
Top Products
14
Handling and operation
SLB 450 A1
GB
IE
CY
Function selection with the remote control
IMPORTANT
Risk of damage from water intrusion.
Nev
er submerge the appliance or the remote control in water
or other fl uids. The appliance or the remote control could be
irreparably damaged.
Using the suction cups on the back of it, attach the remote control onto the ►
tiles next to your bath tub.
NOTICE
To ensure faultfree operation of the remote control ►
9
, it must be held during
operation so that it points directly to the pump
.
Switch the pump
on with one press of the function button
10
. The LED
operation indicator
5
on the pump blinks green, and the pump is operating
at the lowest level of intensity.
By once again pressing the function button
10
the LED operation indicator
5
on the pump blinks red and the pump switches to the high intensity level.
By pressing the function button
10
once again, the appliance switches into
the programme mode. The LED operation indicator
5
on the pump blinks
orange, and the appliance is now working in the massage mode. With this,
the appliance works by alternating between the low and high intensity levels.
Press the function button
10
a fourth time to switch the appliance off .
The LED operation indicator
5
on the pump extinguishes.
NOTICE
The appliance switches off automatically after 20 minutes usage time. ►