Filter
Top Products
-4- Shop Fox
®
Classic Fence
12. USE A PUSH STICK WHEN CUTTING
NARROW PIECES.
13. DO NOT REACH BEHIND TABLE SAW
TO GRAB CUTOFF PIECE. If wood binds
against saw blade it will kick back faster
than you can let go.
14. DO NOT LET THE END OF THE
WORKPIECE CONTACT THE FENCE WHILE
CROSSCUTTING WOOD WITH THE MITER
GAUGE. There is a potential for kick-back.
Move the fence away.
15. DISCONNECT TABLE SAW FROM POWER
before servicing and when changing
accessories, such as blades, bits, and
cutters.
16. AVOID ACCIDENTAL STARTING. Make sure
the switch is in the “
OFF” position before
plugging in the cord.
17. CHECK DAMAGED PARTS. Do not operate
the table saw until you are certain it is in
perfect running condition.
18. NEVER LEAVE THE TABLE SAW RUNNING
UNATTENDED - TURN POWER OFF. Do not
leave the saw until it comes to a full stop.
19. DO NOT OPERATE EQUIPMENT IF USING
DRUGS, ALCOHOL, OR MEDICATION.
20. DO NOT OPERATE EQUIPMENT if you are
mentally or physically fatigued.
21. IF THERE IS SOMETHING YOU DO NOT
UNDERSTAND, DO NOT OPERATE
MACHINE! Ask for help first.
22. BAD HABITS ARE DANGEROUS. Review all
safety procedures often.
1. KNOW YOUR TABLE SAW. Read the
owner’s manual carefully. Learn the tool’s
applications and limitations, as well as its
particular hazards.
2. DO NOT REMOVE GUARDS.
Maintain
guards in working order.
3. ENSURE THAT YOUR TABLE SAW IS
ELECTRICALLY GROUNDED. Never remove
the grounding prong.
4. KEEP WORK AREA CLEAN. Cluttered areas
invite accidents.
5. AVOID DANGEROUS ENVIRONMENTS.
Do not use power tools in damp or wet
locations or expose them to rain. Keep
your work area well lighted.
6. MAKE WORKSHOP CHILD-PROOF with
padlocks, master switches, or by removing
starter keys.
7. DO NOT FORCE WORK THROUGH TABLE
SAW. Tools work better and more safely
when they are allowed to work at their
own speed.
8. WEAR PROPER APPAREL. Do not wear
loose clothing, gloves, neckties, or jewelry
that might get caught in moving parts.
Non-slip footwear should be worn. Tie
back long hair.
9. NEVER STAND OR LEAN ON TOOL.
10. ALWAYS USE SAFETY GLASSES, EAR
PROTECTION AND RESPIRATORY
PROTECTION.
11. DO NOT OVERREACH. Keep proper footing
and balance at all times.
These safety rules cannot cover every situation in a woodshop. Consider your conditions when
setting up and using your SHOP FOX
®
Classic Fence.
SAFETY PRECAUTIONS