Filter
Top Products
4
Be Aware of the Working Environment
Avoid long-term
operation in very hot
or very cold weather.
Make sure
bystanders
or observers
outside the
15 meter (50
feet) “danger
zone” wear eye
protection.
Be extremely careful
of slippery terrain,
especially during rainy
weather.
If contact is made with a hard object,
stop the engine and inspect the cutting
attachment for damage.
Be constantly alert for
objects and debris that
could be thrown either
from the rotating cutting
attachment or bounced
from a hard surface.
Reduce the risk of bystanders
being struck by ying debris. Make
sure no one is within 15 meters
(50 feet)— that’s about 16 paces
of an operating attachment. Stop
immediately if a child, pet, or
person comes within a 15 meter
(50 feet)radius. Outside this radius,
there is still a risk of injury from
thrown objects.
Beware of a coasting
blade when brushcutting or
edging. A coasting blade
can injure while it continues
to spin after the throttle
trigger is released or after
the engine is stopped.
ALWAYS clear your work area of
trash or hidden debris that could
be thrown back at you or toward
a bystander. When operating in
rocky terrain or near electric wires
or fences, use extreme caution to
avoid contacting such items with
the cutting attachment.
The Properly Equipped Operator
Always wear a harness when operating the unit .
It adds comfort and helps ensure safety by limiting
movement fore and aft. When the harness is
adjusted properly, the unit should balance with the
cutting attachment parallel to the ground.
Always operate with both hands
rmly gripping the unit.
Wear close-tting clothing to
protect legs and arms. Gloves
offer added protection and are
strongly recommended. Do not
wear clothing or jewelry that
could get caught in machinery
or underbrush. Secure long hair
so that it is above shoulder level.
NEVER wear shorts!
Wear hearing protection devices and a
broad-brimmed hat or helmet. A helmet
is required when using a blade-equipped
brushcutter to clear small trees.
Always wear eye protection such as
goggles or safety glasses to shield
against thrown objects.
When operating with a blade, make sure
the handle is positioned to provide you with
maximum protection from contacting the
blade. Always make sure the handlebar
is installed in accordance with the
manufacturers instructions.
Keep away from the rotating
trimmer line or blade at all
times, and never lift a moving
attachment above waist-high.
Wear appropriate footwear (non-skid
boots or shoes): do not wear open-
toed shoes or sandals. Never work
barefooted!
Keep a proper footing and do not
overreach. Maintain your balance at all
times during operation.
Always make sure
the appropriate cutting
attachment shield is correctly
installed and in good
condition. Do not
operate the unit if the
cutting attachment
shield is missing,
loose, or broken.
Long-term exposure to vibration
can damage your hands.
Prolonged exposure to excessive noise
is fatiguing and could lead to impaired
hearing.
Do not operate the unit
if the cutting attachment
shield is missing, loose,
or broken.
Safety (continued)
15 METERS
(50 FEET)
Always make sure
the appropriate
cutting attachment
shield is correctly
installed.