Shindaiwa EB2510 Blower User Manual


 
5
Unit Description
Figure 3
Prior to Assembly
Using Figure 3 as a guide, familiarize your-
self with the blower and its components.
Understanding the unit helps ensure top
performance, longer service life, and safer
operation.
IMPORTANT!
The terms “left”, “left-hand”, “LH”; “right”,
“right-hand”, and “RH”; “front” and “rear”
refer to directions as viewed by the
operator during normal operation.
IMPORTANT!
Safety and Operation Information Labels:
Make sure all information labels are
undamaged and readable. Immediately
replace damaged or missing information
labels. New labels are available from your
local authorized Shindaiwa dealer.
Before assembling the blower, make
sure you have all required components.
n Power unit and blower assembly.
n This Owner’s/Operator’s Manual
and a tool kit containing a tool bag
and a combination spark plug
wrench/screwdriver.
Carefully inspect all components for damage.
Blower
Tube
Recoil/
Starter
Handle
Fuel
Primer
Bulb
Throttle
Lever
Throttle
Limiter Lever
Exhaust
Air Cleaner
Cover
Fuel Filler
Cap
Blower Air
Ignition Switch
Nozzle
(Standard on
EB3410 and EB2510)
Fan Tip Nozzle
(Standard on EB3410
Optional on EB2510)
Blower Tube
Specications
EB3410
5.1 kg (11.2 lb.)
38 x 30 mm (1.50 x 1.18 in.)
34 cm
3
(2.07 cu. in.)
1.0 kW/1.4 hp @ 8,000 min
-1
(rpm)
Specifications are subject to change without notice.
Model...................................................................................................................
EB2510
Dry Weight (without Blower Tubes).........................................................
4.9 kg (10.8 lb.)
Dimensions (LxWxH)......................................................................................................896 x 255 x 373 mm ( 35 x 10 x 15 in.)
Engine type........................................................................................................4 cycle air-cooled gasoline engine, vertical cylinder
Bore & Stroke.......................................................................................
34 x 27 mm (1.3 x 1.1 in.)
Displacement.............................................................................................
24.5 cm
3
(1.5 cu. in.)
Max Output/min
-1
........................................................................
0.8 kW/1.1hp @ 7,500 min
-1
(rpm)
Fuel/oil ratio...........................................................................................................50:1 with Shindaiwa Premium 2-cycle mixing oil
Carburetor.........................................................................................................................Walbro rotary-type with primer bulb
Ignition...............................................................................................................................CDI (Capacitor Discharge Ignition)
Spark Plug.............................................................................................................................................NGK CMR5H
Starting..................................................................................................................................................Recoil Starter
Stopping....................................................................................................................................Slide Switch (Grounding type)
Fuel Tank Capacity................................................................................................................................0.6 L (20.0 oz)
Exhaust......................................................................................................................................... Spark Arrester Muffler
Air Filtration..........................................................................................................................................Dry Element