Filter
Top Products
6
Product Description
Specications
Specications are subject to change without notice.
Model DH231-24 DH231-30
Engine Type 2-cycle, horizontal cylinder, air cooled
Engine Bore x Stroke 32mm x 28mm (1.26 X 1.10 in)
Engine Displacement 22.5cc (1.37 in
3
)
Unit Weight, Less Fuel 5.8 kg (12.8 lb) 6 .1 kg (13.4 lb)
Unit Dimensions (LxWxH)
1080 x 250 x 210 mm (42.52 x 9.84 x 8.27 in) 1220 x 250 x 210 mm (48.03 x 9.84 x 8.27 in)
Fuel Tank Capacity 0.53 liter (18.0 oz.)
Fuel/oil ratio 50:1 with *ISO-L-EGD or JASO FD class 2-cycle Mixing Oil
Carburetor Diaphragm type
Ignition Fully electronic, transistor controlled
Spark Plug NGK BPMR 6A
Electrode Gap 0.6 mm (0.024 in)
Torque 150 - 170 kgf•cm / 130 - 150 in•lbf
Air Cleaner Foam element
Mufer Type
Spark arrestor mufer or spark arrestor mufer with catalyst
Starting Method Recoil type
Stopping Method Slide switch,grounding type
Blade Length 605 mm (23.82 in) 745 mm (29.33 in)
Blade Type Double-blade cutting action: double-edged blade
Clutch Type Centrifugal clutch, dry-type
Gear Type Spur gears
Gear Lubrication Lithium-based grease
Standard Equipment
Rear handle w/integral controls, anti-vibe mountings, front handle w/guard, tool set, blade cover.
Engine Speed 3,000 RPM
Clutch Engagement Speed 4,100 RPM
Wide Open Throttle Speed (W.O.T.) 11,000 RPM
Using the illustration as a guide, famil-
iarize yourself with this unit and its vari-
ous components. Understanding your
machine helps ensure top performance,
longer service life, and safer operation.
Guard
Blade cover
Front handle
Recoil starter
Cutter
blades
Fuel tank
Throttle interlock
Rear handle
Throttle trigger
Mufer
Air lter
cover
WARNING!
Do not alter this machine
or any of its components!
On/Off Switch