Filter
Top Products
5
Product Description
6SHFLÀFDWLRQV
Using the illustration as a guide,
familiarize yourself with your
machine and its various com-
ponents. Understanding your
machine helps ensure top perfor-
mance, long service life and safer
operation.
Cutting attachment
shield
C242
Outer tube
Brushcutter
blade
Gearcase
Throttle
interlock
Throttle
Ignition
Spark plug
0XIÀHU
Fuel tank
Hanger
Handlebar
Strap
WARNING!
Do not make unauthorized
PRGL¿FDWLRQVRUDOWHUDWLRQVWRDQ\RI
these units or their components.
Engine model SF242E
Dry weight (less attachment) 5.7 kg / 12.6 lb
Engine type 2-cycle catalyst
Bore x stroke 33 x 28 mm / 1.3 x 1.1 in.
Displacement 23.9 cc / 1.5 cu. in.
Maximum power 1.0 HP/0.8 kW @ 8000 min
-1
(rpm)
Recommended idle speed 3,000 (±250) min
-1
(rpm)
Fuel/oil ratio 50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil*
Carburetor type Walbro WYK, diaphragm-type
Fuel tank capacity 670 mL / 22.3 oz
Ignition One-piece electronic, transistor contolled
Spark plug NGK BPMR6A
Electrode Gap 0.6 - 0.7 mm / .024 -.028 in.
Torque 170 - 190 kg cm / 16.7 - 18.6 N∙m
Air cleaner type Foam, non reversible
Starting method Recoil
Stopping method Slide switch
Transmission type Automatic, centrifugal clutch w/bevel gear
Handle Type Bicycle type
EPA Emission Compliance Period** Category A
** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating
hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours
(Intermediate) and A = 300 hours (Extended).
* The NGK BPMR6A also meets the requirements for electro magnetic compliance (EMC).
Specifications are subject to change without notice.