Shindaiwa AHS254 Trimmer User Manual


 
11
Starting the Engine
IMPORTANT!
Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or
STOP.
NOTE:
The blade cover is used for transportation and storage. Remove blade cover before using the unit.
WARNING!
Never start the engine from the operating position.
WARNING
The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury.
Keep movable parts of the attachment and away from objects that could become entangled or thrown.
Starting the Engine (continued)
Slide the ignition switch to the “ON” 1.
position.
Set the throttle lever to the “fast 2.
idle”:
ON
Fast idle
button
Slide ignition to ON
Primer Bulb
Press primer
bulb...
Depress and hold the throttle lock, a.
then squeeze the throttle trigger.
Depress and hold the fast idle b.
button.
Release the throttle trigger and c.
throttle lock, then release fast idle
button.
Press the primer bulb until fuel 3.
can be seen flowing in the trans-
parent return tube.
Throttle
trigger
Throttle Lock