Shindaiwa AH242 Trimmer User Manual


 
4
Operating Precautions
WARNING!
Never transport the articulated
hedge trimmer or leave it unat-
tended with the engine running.
An engine that’s running could be
accidently accelerated causing the
blades to oscillate.
Make sure that the blade cover is in
place when transporting or storing
the articulated hedge trimmer.
Always make sure that the cut-
ter attachment and all handles and
guards are properly installed and
rmly tightened before operation.
Inspect for broken, missing or
improperly installed parts or
attachments.
Never use a cracked or warped cut-
ter or cutter bar: replace it with a
serviceable one and make sure it
ts properly.
Make sure there are no missing or
loose fasteners, and that the stop
switch and throttle controls are work-
ing properly.
Make sure there is always good
ventilation when operating the artic-
ulated hedge trimmer. Fumes from
engine exhaust can cause serious
injury or death. Never run the engine
indoors!
Never smoke or light res near the
hedge trimmer. Keep the unit away
from excessive heat. Engine fuel is
very ammable and re could lead
to serious personal injury or prop-
erty damage.
Make sure the cutters are cor-
rectly adjusted before operating the
articulated hedge trimmer (see the
section ”Cutter Blade Adjustment”
for cutter adjustment procedures).
Never attempt cutter adjustment
with the engine running!
Before starting the engine, make
sure the cutter is not contacting
anything.
Always conrm safe operation
when using the machine.
Immediately stop the engine with
the stop switch if the machine sud-
denly begins to vibrate or shake.
Always stop the engine imme-
diately and check for damage if
you strike a foreign object or if the
machine becomes tangled. Do not
operate with broken or damaged
equipment.
When cutting a branch that is
under tension, be alert for spring-
back so that you will not be struck
by the moving branch.
If a cutter should bind fast in a cut,
shut off the engine immediately.
Push the branch or tree to ease
the bind and free the cutter.
Always stop the engine and allow
it to cool before refueling. Avoid
overlling and wipe off any fuel
that may have spilled.
To reduce re hazard, keep the
engine and mufer free of debris,
leaves, or excessive grease
Keep a Solid Stance. Maintain
footing and balance at all times.
Do not stand on slippery, uneven
or unstable surfaces. Do not work
in odd positions or on ladders. Do
not over reach.
CAUTION!
Always maintain the articu-
lated hedge trimmer according
to this owner’s manual and fol-
low the recommended scheduled
maintenance.
Never modify or disable any of the
hedge trimmer’s safety devices.
Doing so may cause damage and
lead to personal injury
Always use genuine Shindaiwa
parts and accessories when repair-
ing or maintaining this machine.
Do not make unauthorized modi-
cations to the articulated hedge
trimmer or its components.
Keep the cutters sharp and prop-
erly adjusted.
Never allow the engine to run at
high speed without a load. Doing
so could damage the engine.
When transporting the hedge
trimmer in a vehicle, tie it down
securely to prevent fuel spillage or
damage to the machine.
Always stop the engine and allow
it to cool before refueling. Avoid
overlling and wipe off any fuel
that may have spilled.
Never place ammable material
close to the engine mufer and
never run the engine without the
spark arrestor screen in place.
Always clear your work area of
trash or hidden debris to help
ensure good footing.
Keep the articulated hedge trim-
mer as clean as possible. Keep it
free of loose vegetation, mud, etc.
WARNING!
Hedge Clipper blades are very sharp. Touching them may lead to severe personal injury. Avoid touching
blades whenever possible, and always wear gloves to protect hands