Shindaiwa 68800-94313 Trimmer User Manual


 
5
Specifications are subject to change without notice.
Product Description
IMPORTANT!
The terms “left”, “left-hand”, and “LH”;
“right”, “right-hand”, and “RH”; “front” and
“rear” refer to directions as viewed by the
operator during normal operation.
Recoil
Starter
Handle
Grip
Prior To Assembly
Using Figure 3 as a guide, familiarize your-
self with the Shindaiwa AHS2510 articulat-
ed hedge trimmer and its various compo-
nents. Understanding your machine helps
ensure top performance, longer service life,
and safer operation.
Before assembling, make sure you have
all the components required for a complete
unit:
n Engine/outer tube assembly
n Gearcase/cutter assembly
n Kit with this manual and tool kit for
routine maintenance.
n Cutter blade scabbard
Carefully inspect all components for damage.
Figure 3
Outer
Tube
Hedge Trimmer Cutter
Assembly
Cutter
Assembly
Adjustment
Lever
Cutter Blade
Scabbard
WARNING!
Do not make unauthorized modica-
tions or alterations to your articulated
hedge trimmer or its components.
Model Name............................................................................AHS2510
Engine Model...........................................................................SF2510E
Engine Type................................4-cycle, vertical cylinder, air cooled
Dry Weight....................................................................6.2 kg/13.6 lbs.
Bore x Stroke.................................................34 x 27 mm/1.34 X1.06”
Displacement. ............................................................24.5cc/1.5 cu. in.
Engine Speed at Maximum Power Output............7,500 rpm (min
-1
)
Maximum Power Output ..............................................1.1 hp/0.8 kW
Engine Speed at Idling ............................................3,000 rpm (min
-1
)
Maximum Engine Speed ......................................10,500 rpm (min
-1
)
Fuel/Oil Ratio ...........................................50:1 with Premium 2-cycle
air cooled mixing oil
Fuel Tank Capacity.........................................................590 ml/20 oz.
Carburetor............................................Walbro WYL diaphragm type
Ignition System , Fully electronic, program controlled
Specications
Fuel Tank
Guard
Gearcase
Hedge Trimmer
Cutter Assembly
Cutter Bar and
Cutter Blades
Latch
Release
Latch Lock
Cutter Guard
Handle
Spark Plug.....................................................................NGK CMR5H
Air Filter .................................................Non-reversible, heavy duty,
two-stage, filter element
Starting Method...........................................................Recoil Starter
Stopping Method ............................................................Slide Switch
Cooling System ..................................................................Forced Air
Transmission Type........................... Automatic, centrifugal clutch
with bevel gear
Blade Length ...........................................................567 mm/22.3 in.
Cutter Drive.......................................................................Spur Gear
Gear Lubricant ..............................................Lithium Based Grease
Standard Equipment : Tool kit containing a spark plug wrench,
4mm hex wrench, and 8 x 10 mm spanner
Optional Equipment : Harness and bracket, front handle
Fuel Tank
Air Filter
Assembly
Stop Switch
Powerhead Assembly
Fuel Tank Guard
Spark
Plug
Throttle
Trigger