Shark SSG-503537E/G Portable Generator User Manual


 
SHARK SSG • 8.914-337.0 / 97-6134 • Rev. 8/07
OPERATOR’S MANUAL
PRESSURE WASHER
24
ITEM PART NO. DESCRIPTION QTY
85 2-9013 Clamp, 1/2" Ro-Clip 1
86 4-02110000 Hose, 1/2" Push-on 1 ft.
87 2-3245 Valve, Safety Relief,
4500 PSI 1
88 4-02100000 Hose, 1/4" Push-On
Fuel Line (60") 2
89 2-1105 Swivel, 1/2 JIC Fem
(5030, 5035, 6035) 2
90 2-10630 Elbow, 3/4" JIC x 1/2" Male 1
91 2-000891 Nipple, 1/2" x 2-1/2", Galv.
SCH 80 Pipe 2
92 2-00681 Bushing, 1/2" MNPT x 3/8"
FNPT Steel 1
93 2-0053 Elbow, 1/2 JIC x 3/8 Male Pipe
(Steam Option) 1
94 6-021730 Switch MV60(Steam Option) 1
95 90-20040 Nut, Flange, Whiz Loc 3
96 90-2001 Nut, 5/16", ESNA, NC 12
97 2-00270 Elbow, 3/8 Male Pipe
(Steam Option) 1
98 2-00681 Bushing, 1/2" x 3/8", Steel
(Steam Option) 1
99 90-4001 Washer, 5/16", Flat, SAE 12
100 90-2002 Nut, 3/8" ESNA, NC 2
101 2-1089 Hose Barb, 1/4" x 1/4" Pipe,
90° 1
EXPLODED VIEW PARTS LIST
ITEM PART NO. DESCRIPTION QTY
102 90-1034 Bolt, M6 x 1.0 12 x Metric 8.8
SOC, (6035E/G) 2
103 2-1081 Bushing, 3/4" x 1/2" NPT 1
104 6-05134 Cable, TY, 48" 2
105 7-0139 Insulation, 1/2" Fiber
Sleeving 30"
106 4-02100000 Fuel Line, 1/4" x60" (All Models
Except 11 & 13 HP Hondas) 1
107 2-1003 Nipple, 1/4" Hex 1
108 95-07200053 Bracket, Oil Cooler, 24 HP,
Honda, (6035E/G) 2
109 8.914-337.0 / 97-6134
Manual 1
110 90-1002 Bolt, 1/4" x 1" Hex Head
(6035E/G) 2
111 90-200012 Nut, 1/4" Flange (6035E/G) 2
112 2-010069 Dip Tube, 10.75" 1
113 10-02029 Label, Danger, Cool Engine 1
114 90-1043 Thumb Screw, 1/4" x 20 x
1/2" 4
115 90-1021 Bolt, 3/8" x 2-1/2" Zinc 2
116 90-4002 Washer, 3/8", SAE, Flat 2
117 90-19711 Screw, 1/4"-20 x 1/2" HH,
WL 4
118 2-00742 Adapter, 1/2” x 1/2” Pipe,
STL 1
119 10-0624 Label, RPM Factory Set 1
120 90-2000 Nut, 1/4" ESNA, NC 3
121 90-4000 Washer, Flat, 1/4" ZC 3
122 90-19710 Screw, 1/4": x 3/4" HH NC 3
123 8.930-354.0 Plate Adaptor Gas,
Float Tank TU0250
▲Not Shown