Filter
Top Products
MAINTENANCE
SE10-4A/SE15-4A 03/09 Maintenance Section 5-15
© 2009 Alamo Group Inc.
MAINTENANCE
GEARBOX SERVICING
TOOLS NEEDED FOR DISASSEMBLY AND ASSEMBLY OF GEARBOX
1. Bearing Driver
2. Gasket Sealant
3. Impact Wrench
4. Chisel 3/16” Wide Blade
5. Sledge Hammer
6. Ball Pin Hammer
7. Socket Wrench
8. Screw Driver
9. Punch-Long Drift
10. 14mm Socket
11. 17mm Socket
12. Pry Bar
13. Special Socket #00761024 (Order from Dealer)
Be certain to clamp or securely support the gearbox and sub-assemblies to prevent injuries
to hands and feet due to inadvertent dropping or falling over.
Always wear safety glasses and gloves to prevent eye and hand injury when chiseling or
hammering on metal components. Hardened metal will chip unexpectedly.