Filter
Top Products
ASSEMBLY
FR240-FR162 01/11 Assembly Section 3-9
© 2011 Alamo Group Inc.
ASSEMBLY
Driveline Clamp Cone Yoke Operating Instructions
Remove the two 5/8”-11 bolts from the driveline
clamp yoke and slide yoke onto the shaft and align
holes with annular groove of gearbox shaft.
Reinstall bolts and tighten to 130 ft.-lb. torque. Push
and pull the driveline to ensure it is securely
attached to the shaft. Regularly check the driveline
yoke to ensure a tight connection. To remove the
yoke, remove the bolts and pull yoke off the shaft.
Mower is now assembled and ready for pre-delivery
checks.