Filter
Top Products
OPERATION
2410 02/10 Operation Section 4-3
© 2010 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 96” material bucket operated with an average tractor hydraulic system of 13 GPM
with engine operating at 2200 RPM and control valve relief setting of 2650 PSI.
Horsepower Range 30-90 HP
System pressure/flow rate 2650 PSI/ 13 GPM
Lift Capacity to maximum height 2106 lbs.
Breakout force at pivot pin 7558 lbs.
Rollback force at ground line 3509 lbs.
Total weight with bucket (approx.) 1553 lbs.
Raising time to full height 5.89 seconds
Lower time 4.38 seconds
Attachment dump time 4.38 seconds
Attachment rollback time 2.62 seconds
Hydraulic system flow 13 GPM
System pressure at rated flow 2650 PSI
(A) Maximum Lift Height at Pivot Pin 117”
(B) Clearance with Bucket Dumped 88.5”
(C) Reach at Maximum Height 33”
(D) Maximum Dump Angle 42°
(E) Reach with Attachment on Ground 76”
(F) Attachment Rollback Angle 24°
(G) Digging Depth 4.5”
(H) Overall Height in Carry Position 64”
(Manufacturers estimated specifications and design subject to change without notice.)