Filter
Top Products
OPERATION
2410 02/10 Operation Section 4-2
© 2010 Alamo Group Inc.
OPERATION
RHINO 2410 LOADER
OPERATION INSTRUCTIONS
Your 2410 Loader should now be assembled and inspected for any evidence of defective or damaged parts
before use. Any evidence of damage should be reported to your dealer immediately.
This section of the Operator’s Manual is designed to familiarize, instruct, and educate safe and proper loader
use to the operator. Pictures contained in this section are intended to be used as a visual aid to assist in
explaining the operation of a 2410 loader and are not necessarily of a 2410 loader or exact tractor. Some
pictures may show shields removed for purposes of clarity. NEVER OPERATE this implement without all
shields in place and in good operational condition. The operator must be familiar with the loader and tractor
operation and all associated safety practices before operating the loader and tractor. Proper operation of the
loader, as detailed in this manual, will help ensure years of safe and satisfactory use of the loader.
READ, UNDERSTAND, and FOLLOW
the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards.
(SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad.
(SG-3)
READ AND UNDERSTAND THE ENTIRE OPERATING INSTRUCTIONS AND SAFETY SECTION OF THIS
MANUAL AND THE TRACTOR MANUAL BEFORE ATTEMPTING TO USE THE TRACTOR AND
IMPLEMENT. If you do not understand any of the instructions, contact your nearest authorized dealer for a
full explanation. Pay close attention to all safety signs and safety messages contained in this manual and
those affixed to the implement and tractor. OPS-U- 0001