Filter
Top Products
ASSEMBLY
1480/1485/1495 01/11 Assembly Section 3-10
© 2011 Alamo Group Inc.
ASSEMBLY
Attaching Valve Mounting & Valve
1. Attach valve mounting stand on inside of right mid mount using M10 x 45 mm bolts, lockwashers, and hex
nuts.
2. Attach valve to valve mounting stand with M8 x 50 mm bolts, lockwashers, and hex nuts. Figure AsmP-L-
0001
Attaching Tractor Hydraulic Block
1. Remove cover from tractor hydraulic area
located under foot rest on right side of tractor.
Align attaching holes in tractor with holes in
hydraulic block. Install hydraulic block with O-
rings in place using (4) bolts, lockwashers, and
O-rings. (2 ports are on top & one port to lower
front of tractor).
2. Install 90º pipe hydraulic elbow fitting in top
front pressure port and point toward front of
tractor.
3. Install straight pipe adapters into other two
ports. (Figure AsmP-L-0002).