Filter
Top Products
ASSE BLY/PRE-OPERATION
INSTALL CHUTE DEFLECTOR REMOTE CONTROL
(See Figs. 8 and 9)
1. Install remote cable bracket to discharge chute with
5/16-18 carriage bolt and 5/16-18 Iocknut as shown.
Tighten securely.
2. Install remote cable eyelet to chute deflector with
1/4-20 shoulder bolt and 1/4-20 Iocknut as shown.
Tighten nut securely. Cable eyelet will be loose on
shoulder bolt.
.
Install spring hooks between hex nuts on chute rotater
head and into hole in chute deflector as shown.
1/4-20 SPRING
CHUTE
SHOULDER DEFLECTOR
1/4-20
LOCKNUT f_
CABLE
EYELET
REMOTE
/ CABLE
/ BRACKET
5/16-18
LOCKNUT
FIG. 8
CHUTE DEFLECTOR
CONTROLLEVER
FIG, 9
CHECK TIRE PRESSURE
The tires on your snow thrower were overinflated at the fac-
tory for shipping purposes. Correct and equal tire pressure
is important for best snow throwing performance.
• Reduce tire pressure to 14-17 PSI.
8