Filter
Top Products
SERVICE AN ADJUSTMENTS
TO ADJUST ATTACHMENT LiFT SPRING
(See Fig. 32)
,, While holding spring bushing with wrench, loosen jam
nut.
Turn adjustment bot clockwise to extend spring and
reduce lift effort (for heavier attachments).
,, Turn adjustment bolt counterclockwise for lighter at-
tachments.
• Retighten jam nut against spring bushing.
IMPORTANT: DO NOT ADJUST FOR MAXIMUM SPRING
TENSION WHEN USING LIGHT ATTACHMENTS SUCH
ASAMOWER. ADJUST LIFT LEVER SPRING TO AIDtN
LIFTING ATTACHMENT. DO NOT OVERPOWER SPR! NG.
WHEN REMOVING ATTACHMENT, ALWAYS ADJUST
SPRING TENSION TO ITS LOWEST POSITION,
ADJUSTMENT
SPRING BUSHING
® ATTACHMENT
JAM NUT LIFT SPRING
FIG, 32
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig. 33)
• Raise hood.
= Unsnap headlight wire connector.
• Stand in front oftractor. Grasp hoodat sides, tilt toward
engine and lift off of tractor.
• To replace, reverse above procedure.
/
/
/
HOOD
HEADLIGHT
WIRE
CONNECTION
\
FIG. 33
25