Filter
Top Products
• Reattach the valve cover makingsure the gasket
between the valve cover and cylinderhead is in
place. Startall fourscrews beforetighteningor you
will not be able to get all thescrewsin place.
• Reattach the breather tube.
• Reattach the spark plug wire tothe spark plug.
Retorque Head Bolts
After the first50 hoursof operation,you mustretorque
the head boltsto 4.0 kg.-m. (22 ft.-Ibs.)
Important: If you feel uncomfortableaboutdoingthis
procedure or you don't have the propertools, please
take yourcleaning system in tothe nearestservice
center to havethe valve clearanceadjusted.This is a
very importantstepto insure the longestlifefor your
engine.
Note: Only performthis adjustmentafter first50 hours
of operation.The head bolts willneed no further
adjustment.
• Remove the four (4) screwsfrom the valvecover.
• Remove the valve cover and gasket.
• Torque the bolts to 4.0 kg-m (22 ft-lb).
• Torque sequence isas follows: A, B, C, D, E (star
pattern).
A
c
jE
15