Filter
Top Products
OPERATION
HOW TO USE YOUR WASHER
IF YOU HAVE ANY PROBLEMS OPERATING YOUF..
PRESSURE WASHER, PLEASE CALL THE PRESSURE
WASHER HELPLINE AT 1-800-222-3136.
STOPPING YOUR PRESSURE WASHEF_
_; First, move engine throttle lever to °OEW position(Fig
9).
I
OFFr-]IDLE FAST
-J
FIG. 9
Simply shutttng OFF engine will not release pres-
sure in the system. Pullthe trigger on the spray wand
assembly to relieve the pressure in the hose.
NOTE: A small amount of water will squirt out when you
release the pressure,
SPRAY NO77LES
Your high pressure washer comes equipped with an adjust-
able nozzle (Fig. 10). Attach nozzle as shown in Fig. 10
and HAND TIGHTEN the plastic knob Figure 11 shows the
optional turbo nozzle.
HOW 'TO USE ADJUSTABLE NOZZLE
WARNING: NEVER ADJUST SPRAY PATTERN
WHEN SPRAYING. NEVER PUT HANDS IN FRONT
OF SPRAY NOZZLE TO ADJUST SPRAY PAT-
TERN,
, _=." _,_;_:
FIG. 10
" OPTIONAL TURBO NOZZLE
FIG. 11
With theadjustable nozzle you can adjust the spray pattem
to be either high pressure or low pressure, You can also
adjust the spray so it isconcentrated in a stream pattern or
expanded into a fan pattern Use this nozzle to apply
detergent
_:sr _'_e..-_,-,zz_ attachment torward when you wis!_:.
a_jusi the spray to low _ressure mode (Fig° 12). Pus_
the _ozzle backwa_ toachieve high pressure.
,, "rwistir_g the nozzle adjusts the spray pattern from a
narrow stream to an expanded stream.
,, You can also adjust the pressure by turning the pres-
sure control knob (Fig., 13) to the desired pressure
setting. Turning this knob all the way clockwise pro-
duces the highest pressure. Do not unscrew the pres-
sure control valve more than 3 tunis. Itwill come off
FIG. 13
NOZZLE IN HIGH
PRESSURE MODE
}:. •
t'-.. '-' '
P_,JSH NOZZLE FORWARD gOF
LOW PRESSURE MODE AND DE-
TERGENT APPLICATION
._WISTNOZZLE TO
EXPAND SPRAY
T_;IST /
NOZZLE TO NARROW
SPRAY STEAM
FIG_ 12
10