Sears 45-02181 Lawn Sweeper User Manual


  Open as PDF
of 12
 
4
3. Now tighten the four bolts from step 1.
4. Assemble a bag rod clip to the inside of each lower
handle tube using a curved head bolt secured down
against the clip using a 1/4" lock nut. The open end of
the clips should face towards the sweeper housing. See
gure3.
5. Slide the long bag rod (28-1/2" long) through the stiched
bagaponthetopofthehopperbagasshowningure
4.
6. Slide the short bag rod (25-1/2" long) through the stiched
bagaponthebottomofthehopperbagasshownin
gure4.
7. Assemble the two plastic rod caps to the rod ends of
the bottom bag rod. Assemble two Palnuts to the ends
ofthetopbagrod.Seegure5.
8. Assemble the two plastic caps 3/4" x 7/8" onto the ends
ofthelegstandsasshowningure6.
FIGURE 3
FIGURE 4
FIGURE 5
FIGURE 6
 previous next