Filter
Top Products
REV 10855
2-12-08
14 15
DESCRIPTION
NOTE: Before attempting to use your saw, familiarize yourself with all of the
operating features and safety requirements.
KNOW YOUR CIRCULAR SAW (Fig. 3)
Your circular saw has a precision-built electric motor and it should only be connected to
a 120-volt, 60-Hz AC ONLY power supply (normal household current). DO NOT operate
on direct current (DC). This large voltage drop will cause a loss of power and the motor
will overheat. If the saw does not operate when plugged into correct 120-volt,
60-Hz AC ONLY outlet, check the power supply. The saw has an 8-ft., 2-wire power cord
(no adapter needed).
This Circular Saws have the following features:
1. 9-10855 12 Amp, 4800 RPM (no-load speed) motor provides power and torque for
fast, sure cuts in wood, plywood, hardboard and wood-base materials.
2. Quick depth-of-cut adjustments with a maximum depth of cut:
9-10855 - 2
7
/16-in. at 90°; 1
13
/16-in. at 45°
3. Easy to read Bevel Cut Scale adjusts bevel capacity;
9-10855 ; 0° to 45°
4. Die-cast aluminum blade guards are epoxy coated for durability and extra strength
5. Extended length Trigger Switch with Power Lock-off Button for maximum control
and comfort. Power lock-off button must be pressed in for trigger switch to turn saw “on”.
6. Large stamped Steel Base provides stability, glides smoothly
7. Ergonomically designed Rear Handle and Front Assist Handle provide positive
gripping, control, balance and comfort.
8. Includes Craftsman
®
24 tooth carbide-tipped steel combination blade.
9. Top mounted Blade Spindle Lock for easy blade changes.
10. Sawdust ejection chute helps direct dust and chips away from operator.
11. Permanently lubricated 100% ball bearings for smooth operation and long life.
12. Durable machined gearing for efficient power transmission.
Fig. 3
DESCRIPTION cont.
This Circular Saws have the following features: cont.
Spindle
Clamping
Screw
Base
Bevel Adjustment
Locking Lever
Bevel Scale
Edge Guide
Locking/retaining
Screw
Mounting Slots
for Edge Guide
(sold separately)
Front Assist Handle
Lower
Blade Guard
Lower Blade
Guard Lever
Rear Handle
Trigger Switch
Upper
Blade Guard
Motor Housing
Blade Wrench
(stores in base)
Blade
Spindle
Lock Button
Base
Depth-of-Cut
Adjustment
Lever
Depth-of-
Cut Scale
Front Assist
Handle
Motor Housing
Blade Wrench
(stores in base)
7
1
®
Amps
12
PRODUCT SPECIFICATIONS 9-10855
Input
Rating
No Load Speed
Cutting Depth at 90°
Cutting Depth at 45°
Maximum Bevel Angle
Blade Diameter
12 Amps
120V, 60Hz AC
4800 RPMs
2
7
/
16
-in. (61.97mm)
1
13
/
16
-in. (46.03 mm)
45°
7
1
/
4
-in. (184 mm)