Filter
Top Products
Operating - 8
OPERATING
Forward Travel
To Travel Forward:
Pull and hold traction clutch lever (A) against upper handle.
To Stop Forward Travel:
NOTE: Rear wheels will make a clicking noise when
mower is pushed forward. This indicates that the drive
train is operating correctly.
Release lever (A). Release traction clutch lever before
turning the mower.
Travel Speeds
Travel speed: (SP6211)
• 1stGear:3.9km/h(2.4mph)
Travel speeds: (SP6213)
• 1stGear:3.1km/h(1.9mph)
• 2nd Gear: 3.9 km/h (2.4 mph)
• 3rd Gear: 5.0 km/h (3.1 mph)
To change travel speeds: (SP6213)
NOTE: Mower travel speed can be changed when the
traction clutch lever is engaged and the mower is
moving forward.
• Raise or lower speed control lever (A) to engage desired
gear.
Stopping Engine
Release handle and levers:
• Mower will stop.
• Blade will stop.
• Engine will stop.
M93034
A
IMPORTANT: Avoid damage! If blade does not stop
within 3 seconds after you release blade stop lever,
see your authorized Scotts servicing dealer.
M93035
A
M73293a