Filter
Top Products
57
Section 8
1 48071 Decal, Danger-Spining Blades
2 481040 Decal, Warning-Rotating Blades
3 48319 Decal, 52
48320 Decal, 61
4 481272 Decal, Fuel Tank
5 48656 Decal, Patents
6 481568 Decal, Traction Control
7 48072 Decal, Heavy Duty Commercial
8 48404 Decal, MetalCraft-Made In USA
9 481039 Decal, Belt Cover
10 481640 Decal, Instrument Panel-Upper
11 481669 Decal, Instrument Panel-Upper (Kawasaki)
12 481348 Decal, Instrument Panel-Lower
13 481543 Decal, Cutting Height
14 481567 Decal, Start/Drive Procedure
15 481588 Decal, Seat Support
16 481569 Decal, Turf Tiger
17 481570 Decal, Turf Tiger
18 481664 Decal, Stripes-RH
19 481663 Decal, Stripes-LH
20 481694 Decal, Tiger
Ref. Part
No. No. Description
REPLACEMENT DECALS AND INFORMATION PLATES
* Common hardware which should be purchased locally. All bolts Grade 5 plated, all other fasteners zinc plated.
IMPORTANT ADJUSTMENT
PROCEDURES
READ OPERATOR'S MANUAL
FOR MORE DETAILS
NEUTRAL ADJUSTMENT
TRACKING ADJUSTMENT
FREE WHEEL OPERATION
HYDRAULIC TANK FLUID LEVEL
Check tire pressure-
(Drive tires - 12 psi,
Caster tires - 25 psi)
To move machine without running
the engine, rotate both dump valve
levers located at the LH side of
the pumps CCW 1/2 turn to
"freewheel" positions. Return
levers to original position to
operate the mower.
If the machine pulls to the right,
adjust LH control linkage CCW to
slow left wheel. If the machine
pulls to the left, adjust RH control
linkage CCW to slow right wheel.
Readjust neutral if necessary.
With an operator in the seat,
engine running, control levers
in neutral and the parking brake
disengaged - adjust control
linkage. Loosen jam nuts. If wheel
rotates forward, adjust turnbuckle
CCW. If wheel rotates rearward,
adjust turnbuckle CW. Adjust until
drive wheel stops turning. Tighten
jam nuts. Repeat for opposite side.
Check hydraulic fluid level
daily while fluid is cool.
Fluid level should be 3-1/4"
below top of filler neck.
Fill with SAE 20W50 motor oil only.
IMPORTANT!:
Do not overfill. Room for hot
fluid expansion must be allowed
or resulting expansion may cause
leaks in the system.
Gearbox lubricant:
SAE 80W90 gear oil
481588
Loosen jam nuts
Rotate turnbuckle
481569
481570
R
16
390S0173
17
1918
15
481663
481664
R
20