Scag Power Equipment STHM Lawn Mower User Manual


 
18
TECHNICAL SPECIFICATIONS (CON'T)
CUTTER DECKS SM61A, SM 72A
Type: Out-front design with anti-scalp roller and pneumatic shock
absorber for deck flotation
Construction: 10-gauge steel with 7-gauge (3/16") steel skirt
Cutting Width: 61.0 " (155.0 cm), 71.5" (181.6 cm)
Cutting Height Adjustment: Adjustable from 1-3/4" to 5-1/4" in 1/4" increments
Cutter Blades: .197 Thick, Milled Edge, Wear Resistant Marbain™
SM61A:Three (3) 21" blades
SM72A: Three (3) 24" blades
Blade Engagement: Electric blade brake clutch with instrument panel switch
Lift System: Patented manual winch with automatic brake/clutch,
stainless steel cable
Discharge Opening: Extra wide 11.5", 13.75 " discharge opening with hinged
chute
Caster Wheels: 9 x 3.5 smooth tread flotation, inner tubes, split rims, roller
bearings, with quick pin removal
Spindles: Cast housing, taper roller bearing, low maintenance with
top access grease fitting and grease overfill relief poppet
Pulleys: Cast-iron with easily removed taper hubs
Cutter Deck Belts: B-section with Kevlar cord
ADDITIONAL SPECIFICATIONS
Seat: Foam padded, lever adjustment forward and back, with
padded arm rests
OPTIONAL ITEMS/ATTACHMENTS
Grass Catcher: GCV/HD-44/6 Vacuum Grass Catcher with 6 HP engine, 44
gallon capacity, hard plastic cover, mounts on rear bumper
Mulching Kit: Steel plate fits over discharge opening. No blade change
or removal required. Installs and removes in the field.
Electric Deck Lift: Lift mounts to the side of the rider frame assembly to raise
and lower the deck at the flip of a switch.
Cup Holder: 12 Guage Steel with rubber retainer.
APPROXIMATE DIMENSIONS SM61A SM72A
Length: 113.0" 118.0"
Length with Grass Catcher: 137.0" 142.0"
Tracking Width: 50.0" 50.0"
Width: 70.0" 81.0"
Width (with discharge chute up): 63.0" 74.0"
Width with GCV grass catcher: 70.0" 84.0"
Height: 43.0" 43.0"
Height with GCV grass catcher: 51.5" 51.5"
Weight: 950 lbs. 1000 lbs.
Weight with GCV grass catcher: 1250 lbs. 1300 lbs.
Date of Issue: August, 2003
Specifications Subject To Change Without Notice