Filter
Top Products
IG-570G-1 3 25/10/2007
INSTALLATION OF SAUNA ROOM BODY
1. Place the floor panel in the desired location on a level surface (Note: The floor panel must be
level before installing wall and ceiling panels. If the surface is not level you may need to
shim the bottom panel to get level.)
※ Make sure lines of the flooring of the floor panel are parallel with the front wall.
2. Place the right back panel on the floor panel.
※ The right back panel must be held by people.
3. Place the left back panel on the floor panel.
※ The right back panel must be held by people.
※ Push the left back panel tight to the back panel.