Filter
Top Products
Operation with the Remote
Control Unit
1. Manual Operation
NOTE
Check that the circuit breaker on the power panel is turned on and that the
operation selector of the indoor unit is in the ON position.
If the automatic operation settings of the unit do not meet your needs,
press the setting buttons as described below and change the settings as
desired.
STEP 1 Press the MODE selector button and select the desired
mode.
For drying operation →
For cooling operation →
STEP 2 To start the air conditioner, press the ON/OFF
operation button.
STEP 3 Press the temperature setting buttons to change the
temperature setting to the desired temperature.
Adjustable temperature range:
88 °F max.
60 °F min.
NOTE
The temperature setting changes by one degree each
time the button is pressed. (The air conditioner
remembers the new temperature setting even when it is
turned off.)
STEP 4 Press the FLAP button and set the airflow direction as
desired.
(Refer to ‘‘Adjusting the Airflow Direction’’ on
page 18.)
To stop the air conditioner, press the ON/OFF operation button again.
1HR.
TIMER
ON
OFF
TEMP.
FAN SPEED
MODE
ON OFF
SET
CANCEL
NIGHT
SETBACK
SET TEMP.
FLAP
STEP 1
STEP 3
STEP 2
STEP 4
12 OI-330-12EG
oi330000