Filter
Top Products
7
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Engine Displacement ......................................................................................................................................................30cc
Bar length .......................................................................................................................................................................10 in.
Weight ............................................................................................................................................................................16 lb.
KNOW YOUR PRUNER
See Figure 1.
Before attempting to use this product, familiarize yourself
with all operating features and safety rules.
ENGINE SWITCH
The engine switch controls the ignition system. The switch
must be in the ON (I) position for the engine to start and
run.
“J” BARRIER HANDLE
Using the J” Barrier handle allows better control of the pruner
to maximize operator safety.
PRIMER BULB
The priming bulb pumps fuel from the fuel tank to the car-
buretor. This is necessary only when starting a cold engine
or after refueling an engine that has run out of fuel.
SHOULDER STRAP
The shoulder strap helps support the weight of the pruner
during use.
START LEVER
The start lever opens and closes the choke valve in the
carburetor.
STARTER GRIP
The starter grip is used for starting the engine.
THROTTLE TRIGGER
The throttle trigger is used for starting the pruner, and also
for controlling blade rotation.
STARTER GRIP
BAR
PRIMER BULB
CHAIN OILER
TANK CAP
THROTTLE
TRIGGER
CHAIN
ENGINE
SWITCH
PRUNER
ATTACHMENT
SHOULDER
STRAP
“J” BARRIER
HANDLE
COUPLER
KNOB
SCABBARD
EXTENSION
SHAFT
COMBINATION
WRENCH