Ryobi RY30961 Brush Cutter User Manual


 
23
TROUBLESHOOTING
EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST
Emissions Parts Inspect Before Clean Every Replace Clean Every Replace Every
Each Use 5 Hours Every 25 Hours 25 Hours 50 Hours
or Yearly or Yearly
CATALYST MUFFLER ASSEMBLY .....................................................................................................................
X
AIR FILTER ASSY
includes:
Filter .................................................................
X ............................. X
SPARK SCREEN ..................................................................................................................
X
FUEL TANK ASSY
includes:
Fuel Lines ........................
X
Fuel Cap ..........................
X
IGNITION ASSY
includes:
Spark Plug ........................................................................................
X
ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR TWO YEARS OR FOR THE PERIOD OF TIME PRIOR TO
THE PARTS FIRST SCHEDULED REPLACEMENT WHICHEVER COMES FIRST.
THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER
Congratulations! You have made an investment toward protecting the environment. In order to maintain this product’s
original emission level, please refer to the maintenance section below.
CALL US FIRST
For any questions about operating or maintaining your product,
call the Ryobi
®
Help Line!
Your product has been fully tested prior to shipment
to ensure your complete satisfaction.
WARRANTY
Problem Possible Cause Solution
Spool retainer hard to turn Screw threads are dirty or
damaged.
Clean threads and lubricate with grease if no
improvement, replace the spool retainer.
Grass wraps around drive shaft
housing and string head.
Cutting tall grass at ground level.
Operating trimmer at part throttle.
Cut tall grass from the top down to prevent wrapping.
Operate trimmer at full throttle.