Filter
Top Products
6
SYMBOLS
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
Hz Hertz Frequency (cycles per second)
A Amperes Current
W Watt Power
min Minutes Time
Alternating Current Type of current
Direct Current Type or a characteristic of current
n
o
No Load Speed Rotational speed, at no load
Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed, orbits etc., per minute
Wet Conditions Alert Do not expose to rain or use in damp locations.
Read The Operator’s Manual
To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye and Head Protection Wear eye and head protection when operating this equipment.
Safety Alert Precautions that involve your safety.
Gloves
Wear non-slip, heavy-duty protective gloves when handling the
pole pruner and the blade.
Safety Footwear Wear non-slip safety footwear when using this equipment.
Moving Parts Keep hands away from moving parts.
50'
15m
Keep Bystanders Away Keep all bystanders at least 50 ft. away.
Kickback DANGER! Beware of kickback.
Hot Surfaces
To reduce the risk of injury or damage, avoid contact with any
hot surface.
50'
15m
Risk of Electrocution DANGER! Risk of electrocution!
No Hands Symbol
Failure to keep your hands away from the blade will result in serious
personal injury.