Filter
Top Products
English – 23
TECHNICAL DATA
Technical data
Engine
Cylinder capacity, cm
3
Cylinder bore, mm
Stroke length, mm
Idling speed, rpm
Recommended max. speed, rpm
Speed of output axle, rpm
Max. engine output, acc. to ISO 8893
Catalytic converter muffler
Speed-regulated ignition system
Ignition system
Manufacturer/type of ignition system
Spark plug
Electrode gap, mm
Fuel lubrication system
Manufacturer/type of carburettor
Fuel tank capacity, litres
Weight
Weight without fuel, cutting tool and
guard, kg
Noise emissions
(see note 1:)
Sound power level, measured dB(A)
Sound power level, guaranteed L
WA
dB(A)
Noise levels
(see note 2)
Equivalent noise pressure level at the user’s ear,
measured according to EN ISO 11806 and ISO
7917, dB(A), min/max:
Vibration levels
Vibration levels on the handles, measured according
to EN ISO 11806 and
ISO 7916, m/s
When idling, left/right handles, min:
When idling, left/right handles, max:
At max. speed, left/right handles, min:
At max. speed, left/right handles, max:
240RJ
36,3
38
32
2 700
11 000-11 700
10 000
1,3 kW/9 000 rpm
Yes
Yes
Walbro CD
Champion RCJ 7Y
0,5
Walbro WT
0,5
6,4
109
110
98/101
3,1/3,0
4,0/3,8
6,4/8,2
7,7/11,0
Note 1: Emission of noise to the surroundings measured as sound power (L
WA
) in accordance with the EU directive 2000/14/EC.
Note 2: Equivalent sound pressure level is calculated as the time-weighted energy total for sound pressure levels under various
working conditions with the following time distribution: 1/2 idling and 1/2 max speed.
NOTE! The noise pressure level at operator’s ear and vibrations on the handles are measured with all the approved cutting
attachments for the machine. The table indicates the lowest and highest values.