Ryobi 101 90 47-26 142RB/152RB Brush Cutter User Manual


 
10 English
General working instructions
SAFETY INSTRUCTIONS
Basic safety precautions
1.Observe your surroundings:
To ensure that people, animals or other things cannot affect
your control of the machine.
To ensure that the above mentioned do not come into
contact with the cutting equipment or objects that can be
thrown by the cutting equipment.
NOTE! Never use a machine without the possibility of
calling for help in the event of an accident.
2.Avoid usage in
unfavourable weather
conditions. For example,
thick fog, heavy rain,
strong winds or extreme
cold, etc. To work in bad
weather conditions is
tiring and can create
dangerous situations, for
example, slippery surfaces.
3.Make sure you can walk
and stand safely. Look out
for any obstacles with
unexpected movement
(roots, stones, branches,
pits, ditches, etc.). Take
great care when working
on sloping ground.
4.The engine should be switched off before moving. When
moving over longer distances and transporting the transport
guard should be used.
5.Never put the machine down with the engine running
unless you have good sight of it.
Adjusting the harness and brush cutter
IMPORTANT INFORMATION
This section takes up the basic safety
precautions for working with the brush cutter
and trimmer.
If you encounter a situation where you are
uncertain how to proceed you should ask an
expert. Contact your dealer or your service
workshop.
Avoid all usage which you consider to be beyond
your capability.
Before starting you must understand the
difference between forestry clearing, brush
cutting and grass trimming.
Quick release
On the front is an easily
accessible, quick release
catch:
Pull out the red strap.
The hip strap and one
shoulder strap will be
automatically released at
the same time and the
harness and the engine
unit will slide to the
ground.
Use this if the engine should
catch fire or in any other
emergency situation when
you quickly need to take off
the harness and machine.
Equal load on
shoulders
A well matched saw and
harness make work much
easier. Adjust the harness to
give the best working stance.
Adjust the side straps so that
the weight is equally divided
across the shoulders.
!
WARNING!
When working with the brush cutter the
harness should always be worn. If this is
not done, you cannot control the brush
cutter safely and this can result in injury to
yourself or someone else. Never use a
harness with a defective quick release
catch.