Filter
Top Products
3.2 Wall Panel H Installation
Using a screwdriver, punch out the screw holes on the
top of Front Right Side (H) 2 places.
a.
H
H
Screw Holes
H
Snap Front Right Side (H) into Front Floor (A).
Hold Front Right Side (H) upright to prevent it from
falling (until Right Back (F) is installed).
c.
H
Drill a pilot hole (using 1/8" drill bit) in front lower corner
at location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
b.
ALIGN
ALIGN
click
A