Filter
Top Products
3.0 Wall Panel G Installation
Using a screwdriver, punch out the screw holes on the
top of Front Left Side (G) 2 places.
a.
G
Screw Holes
G
A
Snap Front Left Side (G) into Front Floor (A).
Hold Front Left Side (G) upright to prevent it from
falling (until Left Back (D) is installed).
c.
G
ALIGN
ALIGN
click
A
Drill a pilot hole (using 1/8" drill bit) in front lower corner
at location indicated by screw target.
Note: This pilot hole is to be drilled through both walls.
b.
G