Filter
Top Products
Installing the grass catcher– refer figures 3 and 4.
• Raise the rear flap of the mower.
• Grasp the grass catcher by the top handle and position the grass catcher against the rear of
the mower. Refer to Figure 3.
• Lower the rear flap so that the back edge of the rear flap hooks over the matching lip on the
grass catcher. Refer to Figure 4.
Removing the grass catcher
• Raise the rear flap of the mower to release the grass catcher.
• Lift the grass catcher clear of the mower and lower the rear flap.
Emptying the grass catcher - refer figure 5.
• Remove the grass catcher (as per the instructions above).
• Tilt the grass catcher with the opening downwards.
• Grip the catcher handle of the grass catcher and shake the
clippings out. Refer to figure 5.
OPERATION - Mulch Mowers (only)
Installing the Mulch Plug
4
The grass catcher should only be fitted or removed when the engine is
stopped. Never raise the rear flap when the engine is running.
WARNING
Figure 3. Grass catcher fitment Figure 4. Grass catcher fitted
Rear Flap
Figure 5. Emptying grass catcher
The mulch plug should only be fitted or removed when the engine is stopped.
Never raise the rear flap when the engine is running.
WARNING