Filter
Top Products
6
OPERATION - Mulch Mowers (only)
Vari-Tilt Conbar Mowers (only) – Information
The Rover Vari-tilt System (Patent Pending) is fitted to provide improved
performance when mulching. Generally it is recommended that the conbar is at its
longest length for Mulch mowing and at it’s shortest length for Catch mowing (Refer
to figures 12 & 13). The conbar at it’s longest length also provides a greater
maximum height of cut.
Vari-Tilt Conbar Mowers (only) - Adjustment for grass catching
CAUTION
When adjusting the Vari-tilt conbar, the engine must be stopped and your
feet and hands kept well clear of the cutting blades.
With the engine stopped, move the height adjustment lever (1) to position “6”
(refer to (1) in figure 4).
Loosen the conbar locking knob (A)
Apply downward pressure to the top of the front nose of the mower base so that
the gap in the conbar is at it’s shortest. Refer to figure 12.
Maintain pressure on the front of the mower base and tighten the conbar locking
knob in this position.
Vari-Tilt Conbar Mowers (only) - Adjustment for mulch mowing
With the engine stopped, move the height adjustment lever (1) to position “6”
(refer to (1) in figure 4).
Loosen the conbar locking knob (A)
Apply downward pressure to the handlebar to tilt the mower back so that the the
conbar is at it’s longest. Refer to figure 13.
Maintain downward pressure on the handle bar and tighten the conbar locking
knob in this position.