Filter
Top Products
OPERATION
FN180/FN120 01/11 Operation Section 4-21
© 2011 Alamo Group Inc.
OPERATION
• Ensure each hydraulic cylinder is installed and
retained correctly. Ensure the proper size pins
are used to retain the cylinders in place and
are secured with pins.
• Check for hydraulic oil leaks on the cylinders,
along the hydraulic lines, and at tractor
hydraulic ports.IMPORTANT: DO NOT use
your hands to check for oil leaks. Use a piece
of heavy paper or cardboard to check for
hydraulic oil leaks. OPS-R-0013_B
• Ensure that the mower is equipped and
secured with wing transport locks.
• Check the condition of the wing hinge pins.
• Check the condition of the mower axle
suspension spring.
• Inspect mower tire condition, wheel bearings,
and lug nut torque. OPS-R-0014_A
• Before mower operation ensure that the bolt is
removed from both floating links on the unit.
These bolts are for shipping purposes only.
OPS-R-0086