Filter
Top Products
17
Lifting the Generator
The generator weighs more than 500 pounds (227 kg).
Proper tools, equipment and qualified personnel should be
used in all phases of handling and moving the generator.
5XPwMFOHUITPGwOPNJOBMNJOJNVNTDIFEVMFE
steel pipe (A), supplied by the installer, are required to lift the
generator manually. Insert pipes through the lifting holes (B)
located near the unit’s base.
:PVNBZBMTPMJGUUIFVOJUVTJOHBiIPPLBOEIPJTUwNFUIPE
attached to the lifting pipes, provided that you use a spreader
bar to ensure that the chains or cables DO NOT touch the
generator’s roof.
WARNING Hazardous Voltage - Contact with power
lines could cause electric shock or burns,
resulting in death or serious injury.
Lifting Hazard / Heavy Object - Could result
in serious injury.
t If lifting or hoisting equipment is used, DO NOT contact
any power lines.
t DO NOT lift or move generator without assistance.
t Use lifting pipes as described in Lifting the Generator.
t DO NOT lift unit by roof as damage to generator
will occur.
In areas determined to be hurricane prone, it is
recommended to anchor the standby generator to concrete.
The concrete anchors must be rated to hold 800 lbs ( kg).
There are four (C) 7/16 inch hole locations around the base of
generator in which to anchor the unit.
Concrete Anchoring of Unit
NOTICE Unless mandated by local or state code, a
concrete slab is not required.
C
C C
C
A
B