Remington Power Tools Electric Chain Saw Chainsaw User Manual


 
5
113005
www.desatech.com
ENGLISH
IMPORTANT SAFETY
INFORMATION
Continued
Never try cutting through two logs at same time.
Only cut one log at a time.
Do not bury guide bar nose or try plunge cut (boring
into wood using guide bar nose).
Watch for shifting of wood or other forces that may
pinch chain.
Use extreme caution when reentering a previous cut.
Use low-kickback chain and guide bar supplied
with this chain saw. Only replace these parts with
chains and guide bars listed in this manual.
Never use dull or loose chain. Keep chain sharp
with proper tension.
Saw Maintenance and Kickback Safety
Follow maintenance instructions in this manual. Proper
cleaning of saw and chain and guide bar maintenance
can reduce chances of kickback. Inspect and maintain
saw after each use. This will increase the service life of
your saw. Note: Even with proper sharpening, risk of
kickback can increase with each sharpening.
MAINTENANCE AND STORAGE OF
CHAIN SAW
1. Unplug chain saw from power source
when not in use
before moving from one place to another
before servicing
before changing accessories or attachments,
such as saw chain and guard
2. Inspect chain saw before and after each use.
Check saw closely if guard or other part has
been damaged. Check for any damage that may
affect operator safety or operation of saw. Check
for alignment or binding of moving parts. Check
for broken or damaged parts. Do not use chain
saw if damage affects safety or operation. Have
damage repaired by authorized service center.
3. Maintain chain saw with care.
Never expose saw to rain.
Keep chain sharp, clean, and lubricated for
better and safer performance.
Follow steps outlined in this manual to sharpen
chain.
Keep handles dry, clean, and free of oil and
grease.
Keep all screws and nuts tight.
Inspect power cord often. If damaged, have
repaired by authorized service center.
Never carry chain saw by power cord.
Never yank power cord to unplug it.
Keep power cord from heat, oil, and sharp
edges.
Inspect extension cords often and replace if
damaged.
4. When servicing, use only identical replacement
parts.
5. When not in use, always store chain saw
in a high or locked place, out of children’s reach
in a dry place
in a carrying case or with scabbard over guide bar
Save these instructions. It is your guide to safe and
proper operation of this chain saw.