Filter
Top Products
REMINGTON BRAND DUALACTION ELECTRIC HEDGE TRIMMER | 9
120134
5 troubleshooting
Note: For additional help, visit our
technical ser vice web site at
www.desatech.com.
WARNING: Unplug trimmer from power source before servicing. Severe
injury or death could occur from re, electrical shock, or body contact with
moving blades.
Technical Service
You may have further questions about
assembling, operating, or maintain-
ing this hedge trimmer. If so, you can
visit our Technical Service web site at
www.desatech.com or contact our
Technical Service Department at 1-800-
858-8501 (English only). You may also
write to:
DESA Power Tools
ATTN: Technical Service Specialty
Products
P.O. Box 90004
Bowling Green, KY 42102-9004
When contacting DESA Power Tools,
have ready
• Your Name
• Your Address
• Your Phone Number
• Model Number of Product
• Date of Purchase (include copy of
receipt for written requests)
OBSERVED FAULT POSSIBLE CAUSE REMEDY
Motor does not run when you squeeze
trigger switches
1. Both trigger switches are not fully
depressed at the same time
2. Rear handle is not locked into one of
the 5 preset positions
3. Extension cord connection is loose
4. Household circuit breaker is tripped
or open line fuse
1. Fully squeeze both front and rear
trigger switches (see Basic Trimmer
Operation, page 5)
2. Verify rear handle is locked into one
of the 5 preset positions
3. Check cord connections
4. Check circuit breaker or line fuse
Motor runs, but cutting blades do not
move
Trimmer damaged. Do not use trimmer Contact DESA Power Tools if still under
warranty
Trimmer smokes during operation Trimmer damaged. Do not use trimmer Contact DESA Power Tools if still under
warranty