RedMax EX-LRT Trimmer User Manual


 
Except for an emergency, avoid stopping the
engine while pulling the throttle lever.
ADJUSTING THROTTLE CABLE
The normal play is 1 or 2mm when measured at
the carburetor side end. Readjust with the cable
adjuster as required. (OP9)
(1) cable adjuster
ADJUSTING IDLING SPEED (OP10)
1. When the engine tends stop frequently at idling
mode, turn the adjusting screw clockwise.
2. When the cutting head keeps rotating after
releasing the trigger, turn the adjusting screw
counter-clockwise.
(1) idle adjusting screw
Warm up the engine before adjusting the idling
speed.
NOTE
IMPORTANT
8. Operation
(1)
OP10
.04 in
(1~2mm)
(1)
OP9
23