Filter
Top Products
US-4
HTZ2460/HTZ2460L/CHTZ2460/CHTZ2460L
3. Warning labels on the machine
For safe operation and maintenance, symbols
are carved in relief on the machine. According
to these indications, please be careful not to
take a mistake.
(a) The port to refuel the "MIX GASOLINE"
Position:
FUEL TANK CAP
(b) The direction to close the choke
Position:
AIR CLEANER COVER
(c) The direction to open the choke
Position:
AIR CLEANER COVER
(1) Read owner's manual before operating this machine.
(2) Wear head, eye and ear protection.
(3) Handling this machine improperly could result in
accidents causing serious injury or death. Read this
manual carefully and practice using the hedge-trimmer
until you are fully acquainted with all operations and have
learned to use it correctly.
(4) This is extremely sharp and can easily cause cuts.
If warning label peel off or become soiled and impossible to read,
you should contact the dealer from which you purchased the
product to order new labels and affix them in the required
location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled
hedge-trimmer or you don’t observe the proper usage written
in the manual.
WARNING
IMPORTANT
4. Symbols on the machine
*1: The year will be changed every year of manufacturing.
*2: The initial will be changed every year of manufacturing.
*3: SP : Sealed tank made of HDPE or PE.
■ EMISSION CONTROL
An emission control label is located on the engine.
USE JASO FD OR ISO L-EGD GRADE 50:1 OIL
MANUFACTURED:
THIS ENGINE MEETS U.S. EPA AND CALI-
FORNIA EXH / EVP REGS FOR
2010*
1
S.O.R.E.
ENGINE FAMILY :
AHQZS.0244XY*
2
DISPL.:
24cc
EMISSION CONTROL SYSTEM :
EXH;EM/EVP;SP*
3
COMPLIANCE PERIOD : 300 HOURS
REFER TO OPERATOR'S MANUAL FOR MAINTE-
NANCE, SPECIFICATIONS AND ADJUSTMENTS.
EMISSION CONTROL INFORMATION