Filter
Top Products
22
■ OIL LEVEL
To prevent extensive engine wear and damage
to the unit, always maintain the proper oil level
in the crankcase. Never operate the unit with
the oil level below the bottom of the dipstick.
1. Make sure the engine is stopped and is cool so
the oil has had times to drain into the crankcase.
2. Place the unit on a flat, level surface to get a
proper oil level reading.
3. To keep dirt, grass clippings, etc., out of the
engine, clean the area around the oil fill
plug/dipstick before removing it.
4. Remove the oil plug/dipstick and wipe the oil off.
Reinsert it all the way back in.
5. Remove the oil plug/dipstick and check the oil
level. The level should be up to the top of the
dipstick. (MA9)
6. If the level is low, add a small amount of oil to
the crankcase and recheck. Continue to do this
until the oil level reaches the top of the dipstick.
(MA9)
(1) Oil Fill Plug/Dipstick (2) O-Ring
(3) Top of Dipstick
Be careful not to overfill the unit.
CHANGING THE OIL
For a new engine, change the oil after the first 10
hours of operation. Thereafter, change the oil after
every 50 hours or before storing the unit for an
extended period of time.
It is best to change the oil while the engine is still
warm. The oil will flow freely and carry away more
impurities.
Wear gloves to prevent injury when handing
the unit.
WARNING
NOTE
WARNING
9. Maintenance
MA9
MA8