Filter
Top Products
11. Optional blade usage
❲
29
❳
OPT11
the blade is fed faster than its cutting
capability.
f. Cut only from your right to your left.
g. Keep your path of advance clear of material
that has been cut and other debris.
3. How you can maintain the best control:
a. Keep a good, firm grip on the unit with both
hands. A firm grip can help neutralize bounce.
Keep your right and left hands completely
around the respective handles.
b. Keep both feet spread apart in a comfortable
stance and yet braced for the possibility that
the unit could bounce. Do not overreach.
Keep firm footing and balance.
■ MAINTENANCE
BLADE
• Check the blade and the fasteners for
looseness, cracking, or bending.
• Check the cutting edges and reform with a flat
file.
Point (OPT11) :
1. Keep the end corner sharp.
2. Round the root of the edge, using round file.
3. Do not use water when using a grinder.
• It is recommended that filing should be done by
professionals.
• Especially regarding filing the 22,24-tooth blade,
Leave it to the professionals.
■ TRANSPORTING THE UNIT
• When you finish cutting in one location and wish
to continue work in another spot, turn off the
engine, and lift up the unit and carry it paying
attention fo the blade.
• Never forget to place the protective cover over
the blades.
• When transporting the unit over long distances,
detach the blade fix the unit by ropes.
IMPORTANT