Filter
Top Products
• INSTALLING THE REEL
1.Insert each end of the line through the
eyelet on the outer spool. Then pull the end
firmly to release the line from the holding
slot.
MAINTENANCE
1 4 6
2 5 7
3
7.6m
(25')
3.8m
(12.5')
Ø2.4mm
0.095In
2.Hold the inner reel in place and screw in the
Bump Knob bolt in the correct direction
(clockwise for BT2200LDC and
BC2200E).
B : INSTALLING A PREWOUND REEL
1.Follow the instructions in DISASSEM-
BLING THE HEAD.
2.Follow the instructions in INSTALLING THE
REEL.
II. Bump head for BC2200LDC
10