Profoto Pro-B2 Portable Generator User Manual


 
Profoto – Assesoires
Pro-B2
The Light Shaping Company 21 Profoto
Brief Instructions
See page 18 for top panel picture.
.Connect the desired number of lamp heads to sockets A& B.
.Start charging by pushing the button ON [12]. The ready lamp [8] will light up when
the generator is fully charged.
.The generator can be activated from OFF position by means of a sync signal
from a camera.
.Choose the desired energy distribution with the control POWER [15,16 ] and the
SYM/ASYM switch [2]. The generator will automatically dump if the energy level
is lowered.
.Connect sync cord and/or flash meter to the sync sockets SYNC [6]
.Activate the photocell [5] by pushing the button SLAVE [7].
.Activate the audible signal by pushing the button SOUND [9].
.
Pushing the button MOD.LIGHT [11] turns on the modelling light, which will stay on for
10 seconds. To have the modelling light stay on for a longer period of time push the
button two or three consecutive times, which will give 30 and 60 seconds respectively.
.Choose fast recharging by pushing down the button FAST[10].
.The charge indicator [3] shows the battery charge level.
.Turn off the generator by pushing and holding down the button ON [12]. The generator
automatically turns off after 30 minutes when not in use.
.If using the optional built-in 32 channel radio receiver use the Radio channel control (14)
to set the channel.
The Light Shaping Company 20 Profoto
Pro-B2
Profoto – Brief Instructions
Battery and battery charging
The battery can be charged through the mains outlet by using a special charger or charged
directly from the car cigarette lighter when driving. The charging time is only 2.5 or 5 hours
depending on the charger used. The generator can be used during charging. The generator
cannot be used without a battery in place. The battery will not deteriorate from being
charged frequently or from being charged when not fully discharged. Neither does it need
to be fully charged before using it. The actual battery life is in fact elongated when fully
recharged. The battery indicator shows the charge level and is up-dated when the generator
is turned on or when firing a flash. The battery can be charged when dismantled.
The environment influences the capacity of both the generator and the battery, for example
extreme cold decreases the battery charging capacity.
Profoto Pro-B2 – Assesoires
10.02.18 Multivoltage Charger incl. adapters, 90-130V/190-250V, 50-60Hz,
2.0A, 5 hour charging (incl. with the Pro-B2)
10.02.19 Charger (12/24V) for Car Cigarette Lighter, 3.5A, 2.5 hour charging
10.02.21 Battery only
90.07.26 Battery incl. Cassette
90.07.65 Universal power adapter for 2.5 hour charging, The adapter accepts a wide
range of input voltages: 12-24Vor 90-240V.
34.02.02 Pro-B protective bag