Filter
Top Products
5
1113919-W2-A
9 Align the basin and drain body assembly with the drain hole in the countertop.
Lower the drain body through the countertop drain hole until the basin rests on
the countertop.
10. Slide the washer onto the drain body.
11. Thread the nut onto the drain body.
12. Tighten the nut until secure, making sure the drain is properly centered in the
basin. Do not overtighten.
Complete the Installation
Important! When installing the tap, the water should contact the basin in the area
shown in the diagram for best performance.
1. Apply a thin bead of clear silicone sealant where the basin meets the
countertop.
2. Install the tap in accordance with the tap manufacturer’s instructions.
Apply continuous bead
of silicone sealant.
Countertop
Optimal/Recommended
Water Delivery Location