Filter
Top Products
4
1113919-W2-A
Install the Basin
Caution! Risk of product damage. Do not overtighten connections.
Position the white foam pad on the countertop at the installation location.
Important! The white foam pad provided may be placed on the countertop to enhance
the colour of the basin. If you are planning to install your basin with the foam pad,
use care to not damage or mark-up the pad when locating the drain hole location.
1. Trace the drain hole onto the countertop.
2. Remove the foam pad and set aside.
3. Drilla41mm(1-5/8″)hole,atthemarkedlocation
.
4. Optional: Place the white foam pad on the countertop and line up the hole in
the white foam pad with the drain hole.
5. Discard the gasket supplied with the drain.
6. Slide the foam gasket onto the drain body.
7. Insert the drain body into the basin drain hole.
8. Roll the O-ring onto the drain body. Roll the O-ring up the drain body until it is
seated in the underside of the basin.
Discard gasket
supplied with the drain.
Washer
Roll the O-ring onto the
drain body and seat into the
underside of the basin.
Nut
Drain Body
Foam Gasket
(supplied with basin)
O-Ring
(supplied with basin)
41 mm
Drain Hole